JSfirm Avionics Jobs

Avionics Technician - PHX

Fri, 30 Jul 2010 23:04:00 UT

Cutter Aviation Phoenix, Arizona:
Avionics Technicians are responsible to the Avionics Supervisor and shall assure that the procedure outlined in the repair station manual as well as all FAA Regulations and manufacturer�s instructions are complied with. In addition to all responsibilities listed below, work involves the responsibility of performing routine maintenance, repairs, troubleshooting, modification of aircraft systems, and installations. In addition, component removal and reinstallation, operational checks, and leak checks are all within the responsibility of the avionics technician. The avionics technician is responsible for using sound judgment and technical aptitude to make decisions regarding maintenance, sequence, and techniques, troubleshooting and discrepancy resolution. Essential Functions And Responsibilities: **Ensure that all repairs are accomplished by approved methods and techniques and in accordance with the specifications set forth by the manufacturer in the service manuals, the Federal Aviation Regulations, service bulletins, and airworthiness directives and other data approved by the FAA administrator. **Responsible for following the coordinated activities of their shop or area, so as to minimize delays and increase production and efficiency. **Ensure that all work accomplished will be completed in strict accordance with the manufacturer�s maintenance and repair instructions and TITLE 14 CFR part 43. **Exercise all reasonable care to protect all parts-sub assembles; major assembles and completed units against loss or damage. **Ensure that all applicable repair station forms utilized are properly completed. **Ensure good housekeeping rules are observed and that all shop-working areas are kept clean and orderly at all times. **Ensure that proper tools and equipment are available and those tools are maintained in serviceable condition and ensure that any tool which is found unserviceable for any reason will be removed from service. He will be responsible for good housekeeping and will ensure that housing and facilities and safety precautions are adequate. **Ensure proper handling of parts and the preservation of all units or parts during the work process through the maintenance department. **Required to be thoroughly familiar with the requirements of the repair station manual, FAA Regulations, Airworthiness Directives and Advisory Circulars, Manufactures Service Letters/Bulletins and engineering orders. **Communicates with the avionics lead technician concerning progress of the assigned work. **Perform airframe electrical, avionics repairs, inspections, installations and modifications. **Removal and disassembly of defective parts, assembly and installation of replacement parts and testing of system. **Interpret technical manuals, drawings and blueprints. **Ensure that all discrepancies are signed off with all the information completed, such as part numbers, maintenance manual, ATA and Chapter, etc� **Displays and promotes a positive attitude toward work and other employees. **Use experience and technical expertise to assist when necessary to meet completion and production schedules and produce the quality our company has come to expect. **Assure that all safety precautions are taken and that available protection devices are properly used at all times when applicable to the tasks performed, in order to reduce the risk of possible injury and health problems resulting from performing assigned tasks. **Technicians shall have all their work inspected (except for off-site repairs, see off-site maintenance requirements) by an appropriately rated inspector as listed on the �Roster of Management Supervisory and Inspection Personnel� at the completion of each task. **Participates with management to strategize and implement new maintenance tactics. **Provide leadership and communication to other fellow employees. **Performs related work as assigned. **Supervisory Responsibilities: No

Avionics Supervisor - PHX

Fri, 30 Jul 2010 23:04:00 UT

Cutter Aviation Phoenix, Arizona:
Position Summary: The Avionics Supervisor is responsible to the Manager of Avionics and shall assure that the procedures outlined in the Repair Station Manual as well as all FAA Regulations and manufacturer�s instructions are complied with. In addition, the Supervisor shall delegate and oversee all work performed by technicians on their team in terms of the following: Essential Functions And Responsibilities: **Provide leadership and direction for world-class uncompromising service **Must be able to lead by example and set standards for your area **Responsible to assign qualified personnel to the jobs performed and ensure that all repairs are accomplished by approved methods and techniques and in accordance with the specifications set forth by the manufacturer in the service manuals, the Federal Aviation Regulations, service bulletins, and airworthiness directives and other data approved by the FAA administrator. **Responsible for planning, directing, supervising and coordinating the activities of their shop or area, so as to minimize delays and increase production and efficiency. **Ensure that all work accomplished will be completed in strict accordance with the manufacturer�s maintenance and repair instructions and TITLE 14 CFR part 43. **Responsible for training and assisting his subordinates in proper procedures, methods and practices to be followed in each respective duty. He is to assist the Manager in selecting qualified personnel to attend factory maintenance training schools. **Exercise all reasonable care to protect all parts-sub assembles; major assembles and completed units against loss or damage. **Ensure that all applicable repair station forms utilized by the avionics department personnel are properly completed. **The Avionics Supervisor need not exercise overall supervision at the management level, but must exercise supervision over the working groups giving instructions to personnel placed under his supervision so that a maximum of work with consistent high quality is assured. **Ensure good housekeeping rules are observed and that all shop-working areas are kept clean and orderly at all times. **Ensure that proper tools and equipment are available and those tools are maintained in serviceable condition and ensure that any tool which is found unserviceable for any reason will be removed from service. He will be responsible for good housekeeping and will ensure that housing and facilities and safety precautions are adequate. **Ensure personnel are adequately trained and competent to perform assigned duties. **Ensure proper handling of parts and the preservation of all units or parts during the work process through the avionics department. **Required to be thoroughly familiar with the requirements of the repair station manual, FAA Regulations, Airworthiness Directives and Advisory Circulars, Manufactures Service Letters/Bulletins and engineering orders. **Communicates with the avionics technicians concerning expectations of work to be accomplished. **Ensure that all discrepancies are signed off with all the information completed, such as part numbers, maintenance manual, ATA and Chapter, etc� **Displays and promotes a positive attitude toward work and other employees. **Use experience and technical expertise to assist when necessary to meet completion and production schedules and produce the quality our company has come to expect. **Assure that all safety precautions are taken and that available protection devices are properly used at all times when applicable to the tasks performed, in order to reduce the risk of possible injury and health problems resulting from performing assigned tasks. **Identify any employee�s problems and concerns and deal with them, if unable to solve the problems, forward them to management. **The Supervisor shall have all their work inspected by an appropriately rated Inspector as listed on the �Roster of Management, Supervisory and Inspection Personnel�. The Supervisor shall assure all paperwork is completed by the technicians in the proper order before continuing to another job. Training shall be provided for all procedures of this Repair Station by the Supervisor for any new technician. **Participates with management to strategize and implement new avionics tactics. **Provide leadership and communication to subordinates and employees. **Performs related work as assigned.

Avionics Technician/A&P - DVT

Fri, 30 Jul 2010 23:04:00 UT

Cutter Aviation Deer Valley /Phoenix, Arizona:
Essential Functions And Responsibilities: *Install, troubleshoot, inspect, test, adjust, repair, and/or modify avionics systems, sub-systems and equipment installed on aircraft. * Perform routine maintenance, 100 Hour/Annual Inspections, and repairs/alterations on primarily piston aircraft. *Ensure that all repairs are accomplished by approved methods and techniques and in accordance with the specifications set forth by the manufacturer in the service manuals, the Federal Aviation Regulations, service bulletins, company manuals, airworthiness directives and other data approved by the FAA. *Ensure that all applicable repair station forms utilized are properly completed. *Ensure good housekeeping rules are observed and that all shop-working areas are kept clean and orderly at all times. *Ensure proper handling of parts and the preservation of all units or parts during the work process through the maintenance department. *Required to be thoroughly familiar with the requirements of the repair station manual, FAA Regulations, Airworthiness Directives and Advisory Circulars, Manufactures Service Letters/Bulletins and engineering orders. *Interpret technical manuals, drawings and blueprints. *Ensure that all discrepancies are signed off with all the information completed, such as part numbers, maintenance manual, ATA and Chapter, etc� *Displays and promotes a positive attitude toward work and other employees. *Use experience and technical expertise to assist when necessary to meet completion and production schedules and produce the quality our company has come to expect. *Assure that all safety precautions are taken and that available protection devices are properly used at all times when applicable to the tasks performed, in order to reduce the risk of possible injury and health problems resulting from performing assigned tasks. *Performs related work as assigned.

Avionics Installer - Dallas, TX

Fri, 30 Jul 2010 19:52:00 UT

APA Services Dallas, Texas:
Position Purpose: The Avionics Installer III is responsible for the fabrication and installation of avionics / electrical and cabin system wiring and components at an intermediate level of proficiency. The incumbent works under the supervision of the Avionics Lead and is responsible for the production of high quality work within the standards of FAA and GAC procedures in accordance with customer specifications and delivery commitments. Principal Duties and Responsibilities: Essential Functions: Knowledgeable application of work processes within the scope of GAC policies and procedures Complete assigned tasks with efficiency and thoroughness Occasional assistance in the training of new team members Must demonstrate an understanding and capability to apply job related technical and functional knowledge Must be capable of expressing technical knowledge to design, engineering, and inspection Compliance with FAA and GAC procedures and requirements in the completion of assignments Read and comprehend wiring diagrams, and complete Wires subassemblies, (galley, lavatories, entertainment or divan cabinets, annunciator, assemblies, fuel control panels, etc.), build and install wire harnesses in aircraft. Complete paperwork and administrative assignments with efficiency including but not limited to parts installation and removal sheets, utilization of the AIM system for the production of pick lists, and sign-off on work orders. Assist in the performance of cabin electrical checkout.

Aircraft Electrical Inspector

Fri, 30 Jul 2010 19:46:00 UT

CTS Technical Services N. Charleston, South Carolina:
Perform wire installation inspection and buyoffs; initiate and close out work tags; perform precision measurements. 2nd shift, 12+ month contract. Per diem split and benefits available.

Lead Avionics Technician

Fri, 30 Jul 2010 18:51:00 UT

Precision Aerospace Technologies Inc. Batesville, Arkansas:
Lead Avionics Technician Join our team!

Self motivated, team oriented individual needed for a FAA CRS in North East Arkansas. Avionics through line maintenance repairs and installations on various manufacturer equipment for both Comm/Nav and Autopilot systems. Responsible for completion of projects in a timely manner. System operational checkouts, troubleshooting, and repair capabilities a must. Able to read and comprehend blueprints and/or schematics. 3 to 5 years minimum GA experience required on various piston (Cessna, Beechcraft, & Piper) and light turbine aircraft (King Air, Citation, and Eclipse) Provide customer quotes, pricing, and service a must. Ability to obtain FAA Avionics Repairman Certificate required. FCC and/or A&P License a plus.

Avionic Technicians - Goodyear, AZ

Fri, 30 Jul 2010 18:24:00 UT

PlaneTechs Jacksonville, Florida:

Avionic Technician

Job Description:

Within budgeted or estimated time, repair, modify, install, and perform routine maintenance of all Avionics systems with accuracy and with minimal assistance.
Accurately interpret maintenance manuals, service bulletins, wiring diagrams, system schematics, drawings, engineering orders and other documents from both the customer and company.
Apply deductive reasoning to troubleshoot and repair and/or check complex systems.
Properly utilize Avionics test equipment to perform systems test and keep abreast of new and advanced test equipment and the use of such equipment.
Properly utilized and maintain Avionics hand tools to perform repairs and installations.
Keep leadership and co-workers apprised of work progress and/or problems.
Accurately document work performed as set forth by company and customer maintenance programs on a daily basis using the standard format. Prepare routine reports and correspondence.
Fabricate per drawings and standard practices wire bundles and assemblies to include marking of wires, properly securing wires into bundles, and termination of wires into a variety of contacts and connectors.
Take immediate corrective action regarding unsafe conditions.
Other duties may be assigned.
Operate ground support equipment e.g. power carts, Hi-Reach, etc. as required

Avionic Technicians - Lake Charles,LA

Fri, 30 Jul 2010 18:23:00 UT

PlaneTechs Lake Charles, Louisiana:

Avionic Technician

Job Description:

Within budgeted or estimated time, repair, modify, install, and perform routine maintenance of all Avionics systems with accuracy and with minimal assistance.
Accurately interpret maintenance manuals, service bulletins, wiring diagrams, system schematics, drawings, engineering orders and other documents from both the customer and company.
Apply deductive reasoning to troubleshoot and repair and/or check complex systems.
Properly utilize Avionics test equipment to perform systems test and keep abreast of new and advanced test equipment and the use of such equipment.
Properly utilized and maintain Avionics hand tools to perform repairs and installations.
Keep leadership and co-workers apprised of work progress and/or problems.
Accurately document work performed as set forth by company and customer maintenance programs on a daily basis using the standard format. Prepare routine reports and correspondence.
Fabricate per drawings and standard practices wire bundles and assemblies to include marking of wires, properly securing wires into bundles, and termination of wires into a variety of contacts and connectors.
Take immediate corrective action regarding unsafe conditions.
Other duties may be assigned.
Operate ground support equipment e.g. power carts, Hi-Reach, etc. as required

Avionics - Goodyear, AZ

Fri, 30 Jul 2010 18:16:00 UT

Strom Aviation Goodyear, Arizona:
C check work which requires troubleshooting but also will be install/repair/replace. Troubleshooting will be a very big plus

Avionics Technician- Savannah, GA (CORP)

Fri, 30 Jul 2010 18:12:00 UT

Strom Aviation Savannah, Georgia:
Provide leadership, technical expertise and guidance while performing various operational, functional tests and repairs of avionics/electronic, aircraft equipment and systems to ensure a defect free aircraft. Provide superior technical expertise in troubleshooting and repairing system discrepancies to ensure minimum schedule impact. Demonstrate technical expertise and leadership by defining and implementing process changes to reduce cost and meet schedule without compromising Safety or Quality. Demonstrates the knowledge and leadership skills required to fill in for the team leader thus insuring that the company�s goals of Safety and Quality are enforced all times while adhering to daily work plans to maintain schedule requirements.